Adhesives -Bondloc

Product Information

ANAEROBIC ADHESIVES

Bondloc Anaerobic adhesives were developed to help reduce production costs and time, lower maintenance costs but also to add other benefits like product reliability and replace mechanical locking devices. Once cured the thermoset plastic property provides excellent resistance to various chemical environments, excellent resistance against external impact, and vibrational force.

Bondloc Anaerobic adhesives are single component adhesives that remain liquid until there is an absence of air and contact is made with metal ions. The reaction speed of anaerobic products is mainly influenced by the substrates, as some are active substrates that contain a rich metal ion, whereas inactive substrates contain less metal ion; the bond line gap, as the reaction takes a short timewith a thin bond line, while a thick bond line takes a long time to polymerize; temperature, as elevated temperature activates the reaction of adhesive, while low temperature slows down the reaction of adhesive. Using an activator, will activate the inactive surface as if an active substrate is used.

The range is coloured coded and has a controlled viscosity for optimum dispensing and controlled cure speed depending on the requirement of the application. This allows normal machining by saving a machining cost, and it also allows an automatic dispensing of adhesive for more effective manufacturing.

Our Anaerobic range is broken down into 4 sections which include Threadlockers, Gasket Solutions, Thread Sealants and Retaining Compounds.

THREADLOCKERS

Bondloc Threadlockers are single-component liquids that cure at room temperature to a hard, solid thermoset plastic when applied between steel, aluminium, brass and most other metal surfaces. They cure with the absence of air and when in contact with metal ions, the adhesive completely fills the gaps between mating threads to lock threads and joints. This prevents unwanted movement, loosening, leaks and corrosion. To further enhance their performance, Bondloc anaerobic formulations have been developed for applications with improved cure speeds, high temperatures and oil contamination.

The Bondloc threadlocking range has been developed to replace conventional methods used in the assembly industry such as flat and

spring washers, nylon lined nut, serrated bolt,  which can loosen under vibration, thermal expansion, and/or plastic deformation. These methods do not seal the thread as the space between the bolt and nut is all empty. They also require an extensive inventory of several fastener shapes and sizes and are prone to rust and surface damage.
 
KEY POINTS
  • Single-component – clean and easy to apply
  • Prevent unwanted loosening, leaks, and corrosion
  • Reduces costs over mechanical fittings
  • Resists vibration
  • Can be used on all sizes of fasteners – reduces inventory costs
  • Seal threads and increases friction

GASKET SOLUTIONS

Bondloc Gasket Sealant Solutions are single-component pastes/gels that cure at room temperature in the absence of air and when in contact with metal ions. Bondloc Gasketing products are used to prevent leakage of fluids or gases by forming an impervious barrier, when the seal must remain intact and leak-free. The gasket must be resistant to fluids and gasses and be able to withstand high temperatures. Bondloc gasketing products are self-forming gaskets that provide a perfect seal between components, with maximum face-to-face contact, eliminating flange face corrosion.
 
Used to replace conventional methods used in the assembly industry normally using various pre-cut gaskets, o-ring seals and profile packings which seal by compression. This means they can shrink, creep, they require
storage of multiple shapes to seal different flange shapes; they are costly with an intricate flange shape; they are susceptible to external or internal impact or pressure and they require additional machining or smooth machining to achieve a sealing with pre-cut gaskets.
 

KEY POINTS

  • Single-component – easy and clean to apply
  • Replace conventional gaskets – reduce inventory
  • Excellent instant seal
  • Fill all voids
  • No need for retorquing
  • High resistance to solvents
  • Resist high pressure when fully cured

CYANOACRYLATE ADHESIVES

Cyanoacrylate adhesives cure through reactions with moisture held on the surfaces to be bonded.

They require close fitting joints and usually solidify in seconds which has resulted in the universal generic name of “superglues”. Gelled variants are also available to allow bonding of wider gaps and are ideal for vertical or overhead surfaces.

RETAINING COMPOUNDS

Bondloc Retaining Compounds have an anaerobic cure system. Anaerobic means it cures in the absence of air and the presence of metal ions. The resin remains liquid until it is confined between metal parts. Using Bondloc Retainers when mounting cylindrical parts has distinct advantages over mechanical assemblies. Using retaining compounds allows a manufacturer to use slip-fitted parts with relaxed machining tolerances.

Conventional methods used in the assembly industry are positive drive (pins, keys and splines), friction drive (press-fit, shrink fit)

and welding/soldering. These methods have shortcomings such as fretting corrosion that causes a lower torque transmitting capability, and their machining is costly and lengthy to meet the right assembly tolerance.
 

KEY POINTS

  • Increase assembly reliability
  • Eliminate backlash in keys and splines
  • Increase strength of heavy press fits
  • Eliminate fretting corrosion
  • Seal against environmental corrosion
  • Eliminate high assembly stresses
  • Reduce variations in load transmission

Product Range

STRUCTURAL ADHESIVES

Bondloc structural adhesives utilise a wide range of resin bases in order to provide end users with the best possible product for each individual application. A key factor of our modern design and engineering processes is the desire to produce unique products that will distinguish you from your competitors.

Our innovative range of high-strength structural adhesives are fully compatible with modern manufacturing processes and allow for even greater flexibility in component design.

RTVFS – FOOD SAFE SILICONE

Seal around kitchen work tops, food prep areas, and in canteens. Excellent adhesion to a variety of non-porous substrates e.g. glass and ceramic tiles. Ideal for sealing refrigeration units and areas where repeated food contact is likely.

  • Colour : Blue / White
  • Base : Acetoxy
  • Viscosity : Paste
  • Min / Max Temp : -40°C – +150°C
  • Skinning Time : 5 mins 20°C

Size 80ml, 200ml Powercan, 310ml

INDUSTRIAL AEROSOL MAINTENANCE SPRAYS

A comprehensive range of Premium Industrial Maintenance Aerosols designed for the Engineering and MRO sectors. Products have been extensively tested and proven within leading industrial OEM sectors.

UV ADHESIVES

Bondloc high performance UV-Curing adhesives cure within seconds when exposed to UV light.

Also known as light-curing adhesives they are easy to use single component products that offer exceptional bond strength and clarity. Producing clear bond lines Bondloc UV adhesives are suitable for glass, metal and plastic combinations.

KITS, MERCHANDISERS & ACCESSORIES

 

BONDLOC B577 PIPESEAL

Bondloc B577 is a yellow, medium strength anaerobic sealant formulated with Teflon designed for the locking and sealing of metal pipes and fittings.

The product cures when confined in the absence of air between close-fitting metal surfaces. Fills the space between threaded parts and seals and locks at the same time.

B577 provides an instant low pressure seal, does shrink or creep and seals all types of threaded connections.

Excellent chemical / solvent resistance to ethanol, motor oil, unleaded petrol, acetone and brake fluid. Ideal for large fittings, sprinklers system, water and gas line fittings.

KEY FEATURES

Colour: Yellow

Viscosity: 80,000 – 90,000cps

Breakaway Strength: ≥11Nm (ISO 10964)

Full Cure Time: 6 – 12 hours

Fixture Time: < 10 mins with activator

Min / Max Temp: -55°C – +180°C

Browse product brochure in the gallery below

Accordion Panel
Adhesives -Bondloc
Browse product brochure in the gallery below

Product Information

ANAEROBIC ADHESIVES

Bondloc Anaerobic adhesives were developed to help reduce production costs and time, lower maintenance costs but also to add other benefits like product reliability and replace mechanical locking devices. Once cured the thermoset plastic property provides excellent resistance to various chemical environments, excellent resistance against external impact, and vibrational force.

Bondloc Anaerobic adhesives are single component adhesives that remain liquid until there is an absence of air and contact is made with metal ions. The reaction speed of anaerobic products is mainly influenced by the substrates, as some are active substrates that contain a rich metal ion, whereas inactive substrates contain less metal ion; the bond line gap, as the reaction takes a short timewith a thin bond line, while a thick bond line takes a long time to polymerize; temperature, as elevated temperature activates the reaction of adhesive, while low temperature slows down the reaction of adhesive. Using an activator, will activate the inactive surface as if an active substrate is used.

The range is coloured coded and has a controlled viscosity for optimum dispensing and controlled cure speed depending on the requirement of the application. This allows normal machining by saving a machining cost, and it also allows an automatic dispensing of adhesive for more effective manufacturing.

Our Anaerobic range is broken down into 4 sections which include Threadlockers, Gasket Solutions, Thread Sealants and Retaining Compounds.

THREADLOCKERS

Bondloc Threadlockers are single-component liquids that cure at room temperature to a hard, solid thermoset plastic when applied between steel, aluminium, brass and most other metal surfaces. They cure with the absence of air and when in contact with metal ions, the adhesive completely fills the gaps between mating threads to lock threads and joints. This prevents unwanted movement, loosening, leaks and corrosion. To further enhance their performance, Bondloc anaerobic formulations have been developed for applications with improved cure speeds, high temperatures and oil contamination.

The Bondloc threadlocking range has been developed to replace conventional methods used in the assembly industry such as flat and

spring washers, nylon lined nut, serrated bolt,  which can loosen under vibration, thermal expansion, and/or plastic deformation. These methods do not seal the thread as the space between the bolt and nut is all empty. They also require an extensive inventory of several fastener shapes and sizes and are prone to rust and surface damage.
KEY POINTS
  • Single-component – clean and easy to apply
  • Prevent unwanted loosening, leaks, and corrosion
  • Reduces costs over mechanical fittings
  • Resists vibration
  • Can be used on all sizes of fasteners – reduces inventory costs
  • Seal threads and increases friction

GASKET SOLUTIONS

Bondloc Gasket Sealant Solutions are single-component pastes/gels that cure at room temperature in the absence of air and when in contact with metal ions. Bondloc Gasketing products are used to prevent leakage of fluids or gases by forming an impervious barrier, when the seal must remain intact and leak-free. The gasket must be resistant to fluids and gasses and be able to withstand high temperatures. Bondloc gasketing products are self-forming gaskets that provide a perfect seal between components, with maximum face-to-face contact, eliminating flange face corrosion.
Used to replace conventional methods used in the assembly industry normally using various pre-cut gaskets, o-ring seals and profile packings which seal by compression. This means they can shrink, creep, they require
storage of multiple shapes to seal different flange shapes; they are costly with an intricate flange shape; they are susceptible to external or internal impact or pressure and they require additional machining or smooth machining to achieve a sealing with pre-cut gaskets.

KEY POINTS

  • Single-component – easy and clean to apply
  • Replace conventional gaskets – reduce inventory
  • Excellent instant seal
  • Fill all voids
  • No need for retorquing
  • High resistance to solvents
  • Resist high pressure when fully cured

CYANOACRYLATE ADHESIVES

Cyanoacrylate adhesives cure through reactions with moisture held on the surfaces to be bonded.

They require close fitting joints and usually solidify in seconds which has resulted in the universal generic name of “superglues”. Gelled variants are also available to allow bonding of wider gaps and are ideal for vertical or overhead surfaces.

RETAINING COMPOUNDS

Bondloc Retaining Compounds have an anaerobic cure system. Anaerobic means it cures in the absence of air and the presence of metal ions. The resin remains liquid until it is confined between metal parts. Using Bondloc Retainers when mounting cylindrical parts has distinct advantages over mechanical assemblies. Using retaining compounds allows a manufacturer to use slip-fitted parts with relaxed machining tolerances.

Conventional methods used in the assembly industry are positive drive (pins, keys and splines), friction drive (press-fit, shrink fit)

and welding/soldering. These methods have shortcomings such as fretting corrosion that causes a lower torque transmitting capability, and their machining is costly and lengthy to meet the right assembly tolerance.

KEY POINTS

  • Increase assembly reliability
  • Eliminate backlash in keys and splines
  • Increase strength of heavy press fits
  • Eliminate fretting corrosion
  • Seal against environmental corrosion
  • Eliminate high assembly stresses
  • Reduce variations in load transmission

Product Range

BONDLOC B601 RETAINER

Bondloc B601 is a high strength anaerobic retaining compound suitable for permanent bonds, its low viscosity makes it suitable for filling small gaps.

The product cures when confined in the absence of air between close-fitting metal surfaces.

Ideal for all types of cylindrical parts, such as bearings, gears, splines, pulleys and keyways.

  • Colour: Green
  • Viscosity: 100 – 150cps
  • Gap Fill: 0.15mm
  • Pin & Collar: >15N/mm² (ISO 10123)
  • Prevail Torque: 25 – 50Nm
  • Fixture Time: < 15 mins with activator
  • Full Cure Time: 3 – 6 hours
  • Min / Max Temp: -55°C – +150°C

BONDLOC B603 RETAINER

Bondloc B603 is a high strength anaerobic retaining compound suitable for permanent bonds. B603 is oil tolerant and works well on parts that have not been cleaned or have a oil residue on them.

The product cures when confined in the absence of air between close-fitting metal surfaces.

Ideal for all types of cylindrical parts, such as bearings, gears, splines, pulleys and keyways.

  • Colour: Green
  • Viscosity: 100 – 150cps
  • Gap Fill: 0.15mm
  • Pin & Collar: ≥26N/mm² (ISO 10123)
  • Full Cure Time: 24 hours
  • Fixture Time: < 15 mins @ 20°C
  • Min / Max Temp: -55°C – +150°C

BONDLOC B620 RETAINER

Bondloc B620 is a high strength anaerobic retaining compound suitable for permanent bonds. Its thixotrpic nature coupled with high temperature resistance make it the ideal choice for bonding most cylindrical components that require extra performance.

The product cures when confined in the absence of air between close-fitting metal surfaces.

Ideal for all types of cylindrical parts, such as bearings, gears, splines, pulleys and keyways.

KEY FEATURES:

  • Colour: Green
  • Viscosity: 5,000-12,000cps
  • Gap Fill: 0.2mm
  • Pin & Collar: >17N/mm² (ISO 10123)
  • Fixture Time: 60 mins
  • Min / Max Temp: -55°C – +200°C

BONDLOC B638 RETAINER

Bondloc B638 is a high strength retaining compound designed for the bonding of cylindrical fitting parts, with bond gaps approaching 0.2mm.

The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration. It also has good oil tolerance to minor surface contaminants.

Ideal for shafts, gears, pulleys and similar cylindrical parts.

KEY FEATURES:

  • Colour: Green
  • Viscosity: 2,000 – 3,000cps
  • Gap Fill: 0.2mm
  • Pin & Collar: >17N/mm² (ISO 10123)
  • Fixture Time: < 5 mins with activator
  • Full Cure Time: 24 hours
  • Min / Max Temp: -55°C – +180°C

STRUCTURAL ADHESIVES

Bondloc structural adhesives utilise a wide range of resin bases in order to provide end users with the best possible product for each individual application. A key factor of our modern design and engineering processes is the desire to produce unique products that will distinguish you from your competitors.

Our innovative range of high-strength structural adhesives are fully compatible with modern manufacturing processes and allow for even greater flexibility in component design.

RTV123 – GASKET SILICONE

Can be used on all glazing and industrial work along with common building and construction joints. Also suitable for use on a wide range of substrates including metal, wood, painted metals, glass, PVC, polycarbonate, polyacrylate and many others.

  • Colour : Clear / White / Black
  • Base : Acetoxy
  • Viscosity : Paste
  • Min / Max Temp : -40°C – +150°C
  • Skinning Time : 5 mins 20°C

Size 80ml, 200ml Powercan, 310ml

RTVFS – FOOD SAFE SILICONE

Seal around kitchen work tops, food prep areas, and in canteens. Excellent adhesion to a variety of non-porous substrates e.g. glass and ceramic tiles. Ideal for sealing refrigeration units and areas where repeated food contact is likely.

  • Colour : Blue / White
  • Base : Acetoxy
  • Viscosity : Paste
  • Min / Max Temp : -40°C – +150°C
  • Skinning Time : 5 mins 20°C

Size 80ml, 200ml Powercan, 310ml

INDUSTRIAL AEROSOL MAINTENANCE SPRAYS

A comprehensive range of Premium Industrial Maintenance Aerosols designed for the Engineering and MRO sectors. Products have been extensively tested and proven within leading industrial OEM sectors.

UV ADHESIVES

Bondloc high performance UV-Curing adhesives cure within seconds when exposed to UV light.

Also known as light-curing adhesives they are easy to use single component products that offer exceptional bond strength and clarity. Producing clear bond lines Bondloc UV adhesives are suitable for glass, metal and plastic combinations.

KITS, MERCHANDISERS & ACCESSORIES

BONDLOC B577 PIPESEAL

Bondloc B577 is a yellow, medium strength anaerobic sealant formulated with Teflon designed for the locking and sealing of metal pipes and fittings.

The product cures when confined in the absence of air between close-fitting metal surfaces. Fills the space between threaded parts and seals and locks at the same time.

B577 provides an instant low pressure seal, does shrink or creep and seals all types of threaded connections.

Excellent chemical / solvent resistance to ethanol, motor oil, unleaded petrol, acetone and brake fluid. Ideal for large fittings, sprinklers system, water and gas line fittings.

KEY FEATURES

Colour: Yellow

Viscosity: 80,000 – 90,000cps

Breakaway Strength: ≥11Nm (ISO 10964)

Full Cure Time: 6 – 12 hours

Fixture Time: < 10 mins with activator

Min / Max Temp: -55°C – +180°C

Gasketing Products

Gasket Materials Include Please Request for any additional Materials

Packings

Tab Title