LN Series
The LN Series is a replacement for the HUNT Light series (LS)
Parts available from STOCK.
This range of bearing is available in an infinite range of bores to suit any shaft size from 15mm to 50mm (1/2″ to 2″). The unit is fully split with the housing made of cast iron and the split bush gunmetal. The gunmetal bearings are 1 1/2 diameters through (i.e.: – A bush for a 2″ shaft is 3″ long.)
The inserts are replaceable.
Croft NSO Angular Plummer Blocks
This range of bearing is available in an infinite range of bores to suit any shaft size from 25mm to 200mm (1″ to 8″) and are available either 1 1/2 or 2 dia’s through. The units are fully split with the housing made of cast iron and the split bush gunmetal. Bearing inserts are fully replaceable from stock.
Loose Ring Oiler Fan Bearing LRO
This range of bearing is available in an infinite range of bores to suit any shaft size from 25mm to 200mm (1″ to 8″). Loose rings riding on the shaft and dipping into an oil reservoir ensure efficient shaft lubrication. Oil is distributed through grooves to the full length of the bearing. This ensures long life. The unit is fully split with the housing made of cast iron and the split bush gunmetal. The gunmetal bearings are 2 diameters through (i.e.: – A bush for a 100mm shaft is 200mm long.) Bearing shells are available from stock.
Hunt Engineers Series EN
This range of bearing is available in an infinite range of bores to suit any shaft size from 25mm to 150mm (1″ to 6″). The unit is fully split with the housing made of cast iron and the split bush gunmetal. The gunmetal bearings are 2 diameters through (i.e.: – A bush for a 100mm shaft is 200mm long.) Bearing shells are available from stock.
Croft NSO Medium and Heavy Duty
This range of bearing is available in an infinite range of bores to suit any shaft size from 25mm to 200mm (1″ to 8″). The unit is fully split with the housing made of cast iron and the split bush gunmetal. For Medium duty units the gunmetal bearings are 1 1/2 diameters through (i.e.: – A bush for a 2″ shaft is 3″ long.) For heavy duty units the gunmetal bearings are 2 diameters through (i.e.: – A bush for a 4″ shaft is 8″ long.) Bearing shells are available from stock.
Angled units can also be supplied as a special please speak to our sales department for more information.
S Types Medium Duty SX
This range of bearing is available in an infinite range of bores to suit any shaft size from 50mm to 100mm (2″ to 4″). The unit is fully split with the housing made of cast iron and the split bush gunmetal. The gunmetal bearings are 1 1/2 diameters through (i.e.: – A bush for a 2″ shaft is 3″ long.) The bearing shells are available from stock.
DIN506 Heavy Duty Series DN6
This European range of bearing is available in an infinite range of bores to suit any shaft size from 55mm to 300mm (2″ to 12″). The unit is fully split with the housing made of cast iron and a gunmetal split bush Replacement shells are available from stock.
DIN 505 Medium Duty Series DN5
This European range of bearings is available in an infinite range of bores to suit any shaft size from 45mm to 150mm (1 3/4″ to 6″). The unit is fully split with the housing made of cast iron and the split bush made of gunmetal. Replacement inserts are available from stock. Replacement shells can easily be fitted.
Registered with and Validated by Achilles ID 0005204
